Skip to content
A little knowledge. A much better cup.

How to Use a Chemex Coffee Maker: Complete Brewing Guide

The Chemex coffee maker is a popular choice for people who enjoy clean, smooth, and flavorful coffee. Its simple glass design and thick paper filters help produce a cup with less sediment and fewer coffee oils than many other brewing methods. However, getting the best results requires the right coffee grind size, water temperature, coffee-to-water ratio, and pouring technique.

If you are new to pour-over coffee, learning how to use a Chemex coffee maker may seem difficult at first. The good news is that the process is simple once you understand each step.

This guide explains the equipment you need, how to prepare your coffee, the correct brewing measurements, common mistakes, and practical tips for making better Chemex coffee at home.

Brewing DetailRecommended Starting Point
Coffee amount30 grams
Water amount450–510 ml
Coffee ratio1:15 to 1:17
Grind sizeMedium-coarse
Water temperature90–96°C (195–205°F)
Blooming time30–45 seconds
Total brewing timeApproximately 3.5–5 minutes

What Is a Chemex Coffee Maker?

A Chemex coffee maker is a manual pour-over brewing device made primarily from heat-resistant glass. It was designed to combine a coffee brewer and serving vessel in one simple piece of equipment.

It uses specially designed paper filters that are thicker than many standard coffee filters. These filters help remove much of the coffee oil and fine sediment, producing a clean and light-bodied cup.

How Does a Chemex Work?

The Chemex uses gravity to extract coffee flavor. You place ground coffee inside a paper filter and slowly pour hot water over it.

The water passes through the coffee grounds and extracts soluble compounds that create the coffee’s flavor and aroma. Gravity then pulls the brewed coffee through the filter into the glass container.

The paper filter holds back the grounds and much of the sediment. This creates a cleaner cup with a different texture from coffee brewed using a French press.

What Makes Chemex Different from Other Coffee Makers?

Several features make the Chemex different:

  • Thick paper filters: They remove more oils and fine particles than many ordinary filters.
  • Glass construction: The brewer does not add unwanted flavors to the coffee.
  • Clean flavor: The filtered coffee often has a lighter body and clear flavor characteristics.
  • Simple design: It does not require electricity or complicated controls.
  • Manual brewing: You can control the pouring speed, water quantity, and extraction process.

The Chemex is particularly suitable for people who enjoy tasting the individual characteristics of different coffee beans.

What Equipment Do You Need to Brew Coffee with a Chemex?

You do not need a large collection of accessories to make good Chemex coffee. A few basic tools are enough to get started.

Essential Chemex Brewing Equipment

Here are the main items you should prepare:

  • Chemex coffee maker: Choose a suitable size based on how many cups you usually prepare.
  • Chemex paper filters: Use filters designed for your particular Chemex model.
  • Fresh coffee beans: Whole beans generally provide better freshness and aroma.
  • Burr coffee grinder: Helps produce a more consistent grind size.
  • Gooseneck kettle: Makes it easier to control the direction and speed of water pouring.
  • Digital kitchen scale: Measures coffee and water accurately.
  • Timer: Helps track blooming and total brewing time.
  • Filtered water: Reduces unwanted tastes that may affect your coffee.

Optional Accessories for Better Brewing

You can also use a few additional tools:

  • Coffee thermometer: Helps check water temperature.
  • Coffee storage container: Protects beans from air, moisture, and light.
  • Coffee server: Useful if you want to transfer brewed coffee.
  • Tasting cup: Helps you evaluate the aroma, body, and flavor.

A gooseneck kettle and digital scale are particularly helpful if you want to make consistent coffee every day.

Choosing the Right Coffee Beans for Chemex

The coffee beans you choose have a major influence on the final taste. Since Chemex filters produce a clean cup, they work particularly well with beans that have interesting natural flavor characteristics.

Best Coffee Roast for Chemex

Light roast: Light-roasted beans often have bright acidity and fruity or floral notes. They are a good choice if you want to explore the original characteristics of specialty coffee.

Medium roast: Medium-roasted beans offer a balance of sweetness, acidity, and body. They are a versatile option for everyday Chemex brewing.

Dark roast: Dark-roasted beans produce stronger roasted flavors, including chocolate, smoke, and bitterness. They can work with Chemex, although the result may have less noticeable origin-specific character.

For beginners, light or medium roast coffee is a good starting point.

Whole Beans vs. Pre-Ground Coffee

Whole coffee beans are generally the better choice because they retain their aroma longer than ground coffee.

Grinding immediately before brewing helps preserve the coffee’s natural fragrance and flavor. It also allows you to adjust the grind size according to your brewing results.

Pre-ground coffee is convenient, but its grind size may not be ideal for your particular Chemex recipe.

Which Coffee Origins Work Well with Chemex?

Different coffee origins offer different flavor profiles.

  • Ethiopian coffee: Often features floral, citrus, and fruity characteristics.
  • Colombian coffee: Commonly offers balanced sweetness, caramel, and nutty notes.
  • Kenyan coffee: Often has bright acidity and berry-like flavors.

These are general characteristics, not guarantees. Processing methods, varieties, and growing conditions also influence the final cup.

Understanding Chemex Coffee Ratios and Measurements

The coffee-to-water ratio is one of the most important parts of Chemex brewing. It determines how concentrated your coffee will be.

Recommended Chemex Coffee-to-Water Ratio

A useful starting range is 1:15 to 1:17.

This means using 15 to 17 grams of water for every gram of coffee.

For example:

  • 30g coffee with 450ml water gives a 1:15 ratio.
  • 30g coffee with 480ml water gives a 1:16 ratio.
  • 30g coffee with 510ml water gives a 1:17 ratio.

If you prefer stronger coffee, begin with a 1:15 ratio. If you enjoy a lighter cup, try 1:17.

How Much Coffee Should You Use?

The following measurements provide practical starting points:

Coffee AmountWater AmountRatio
15g240ml1:16
20g320ml1:16
30g480ml1:16
40g640ml1:16
50g800ml1:16

These are starting measurements. You can adjust them depending on your preferred strength and Chemex capacity.

Why Accurate Measurements Matter

Measuring coffee and water helps you repeat the same brewing process.

Without accurate measurements, one cup may taste too strong while another tastes weak. A digital scale makes it easier to control the ratio and identify which adjustments improve the flavor.

How to Choose the Right Chemex Grind Size

Grind size affects how quickly water passes through the coffee bed. It also influences how much flavor is extracted during brewing.

Best Grind Size for Chemex

A medium-coarse grind is a good starting point for most Chemex recipes.

The coffee particles should look somewhat similar to coarse table salt. They should not be as fine as espresso grounds or as large as the grounds used for some French press recipes.

A burr grinder is useful because it produces more consistent particles than many basic blade grinders.

How Grind Size Changes Coffee Flavor

Grind size can affect both extraction and brewing time.

If the grind is too fine:

  • Water may drain too slowly.
  • Brewing time may increase.
  • Coffee may taste bitter or overly strong.

If the grind is too coarse:

  • Water may pass through too quickly.
  • Extraction may be insufficient.
  • Coffee may taste weak, sour, or underdeveloped.

If your coffee tastes unbalanced, adjust the grind slightly and test another brew. Avoid changing several variables at once.

How to Use a Chemex Coffee Maker: Step-by-Step Brewing Guide

Once you have prepared your equipment and coffee beans, you can begin brewing. Follow these steps to make a balanced cup.

Step 1: Heat Your Water

Start by heating filtered water to approximately 90–96°C (195–205°F).

This is a useful starting range for pour-over coffee. The ideal temperature may vary depending on the coffee roast and your taste preferences.

If you do not have a thermometer, bring the water to a boil and allow it to cool briefly before pouring.

Step 2: Prepare the Chemex Filter

Open the Chemex paper filter into a cone shape.

Place it inside the top of the brewer. Position the side with three layers against the spout and the single-layer side toward the opposite side.

This arrangement helps support the filter while allowing air to escape through the spout.

Step 3: Rinse the Paper Filter

Pour hot water over the entire paper filter.

This step helps remove any paper taste and warms the glass brewer. Make sure the filter sits properly against the Chemex walls.

After rinsing, carefully discard the water collected inside the brewer.

Step 4: Measure and Grind Your Coffee

Weigh your coffee beans using a digital scale.

For a beginner-friendly recipe, use:

  • Coffee: 30 grams
  • Water: 480ml
  • Ratio: 1:16

Grind the beans to a medium-coarse consistency immediately before brewing.

Step 5: Add Coffee Grounds to the Filter

Place the ground coffee inside the prepared filter.

Gently shake the Chemex or level the coffee bed with a small movement so the grounds form an even surface.

An even coffee bed helps distribute water more consistently during brewing.

Step 6: Start the Bloom

Start your timer and slowly pour approximately 60ml of hot water over the coffee grounds.

Make sure all the grounds become wet. Allow the coffee to bloom for approximately 30–45 seconds.

During blooming, trapped carbon dioxide escapes from freshly ground coffee. You may notice bubbles forming on the surface.

This step prepares the grounds for more even extraction.

Step 7: Continue Pouring Water

After blooming, gradually pour the remaining water over the coffee.

Use controlled circular movements, starting near the center and moving outward. Avoid pouring directly onto the paper filter.

You can divide the remaining water into two or three pours. Try to maintain a consistent water level without flooding the coffee bed.

Pour slowly and steadily rather than adding all the water at once.

Step 8: Complete the Brew and Serve

Allow the water to drain through the coffee grounds.

For many small-to-medium Chemex brews, the total brewing time is approximately 3.5–5 minutes, although the exact time depends on your recipe and equipment.

Once dripping is complete, remove the filter and discard the used grounds.

Gently swirl the Chemex to mix the brewed coffee before serving. This helps distribute the coffee evenly and gives you a consistent taste throughout the cup.

Understanding Chemex Brewing Time and Water Temperature

Water temperature and brewing time have a direct influence on coffee extraction. Small adjustments can change the sweetness, acidity, and bitterness of your final cup.

Ideal Chemex Brewing Temperature

A good starting temperature is 90–96°C (195–205°F).

Hotter water generally extracts coffee compounds more quickly, while cooler water may slow extraction.

Light-roasted coffee may benefit from the higher end of the range, while some darker roasts may taste better at slightly lower temperatures.

However, your preferred flavor should guide the final adjustment.

How Long Should Chemex Coffee Take to Brew?

A typical small-to-medium Chemex brew takes approximately 3.5–5 minutes.

Several factors influence the total brewing time:

  • Coffee grind size.
  • Coffee-to-water ratio.
  • Pouring speed.
  • Filter type.
  • Coffee freshness.
  • Amount of coffee being brewed.

If the water drains too quickly, your grind may be too coarse. If it drains too slowly, the grind may be too fine or the coffee bed may be clogged.

Use brewing time as a helpful reference rather than a strict rule.

Common Chemex Brewing Mistakes and How to Avoid Them

Even a simple brewing method can produce disappointing results if you overlook a few important details.

Using the Wrong Grind Size

A grind that is too fine can slow water flow and create excessive extraction. A grind that is too coarse may produce weak coffee.

How to avoid it: Start with medium-coarse grounds and make small adjustments based on taste and brewing time.

Skipping the Filter Rinse

Unrinsed paper filters may add an unwanted paper flavor to your coffee. A dry filter also does not preheat the brewer.

How to avoid it: Rinse the filter thoroughly with hot water before adding coffee.

Pouring Water Too Quickly

Pouring too fast can disturb the coffee bed and create uneven extraction.

How to avoid it: Use a controlled circular pouring technique and maintain a steady water flow.

Using Incorrect Coffee-to-Water Ratios

Too little coffee can produce a weak cup, while too much coffee may create an overly concentrated result.

How to avoid it: Use a digital scale and begin with a 1:16 ratio.

Using Water at the Wrong Temperature

Water that is too cool may lead to under-extraction, while excessive heat can make some coffees taste harsh.

How to avoid it: Start within the recommended temperature range and adjust gradually.

Brewing with Stale Coffee Beans

Old or poorly stored coffee may lose much of its original aroma and flavor.

How to avoid it: Use fresh whole beans and store them in an airtight container away from heat, light, and moisture.

How to Adjust Chemex Coffee Flavor to Your Preference

Once you understand the basic brewing method, you can experiment with different measurements and techniques to create coffee that suits your taste.

How to Make Chemex Coffee Stronger

If your coffee tastes too light, try increasing the amount of coffee while keeping the water quantity the same.

For example, you can move from a 1:16 ratio to 1:15.

You can also experiment with grind size, but make small changes to avoid over-extraction.

How to Make Chemex Coffee Smoother

For a balanced cup, use fresh coffee beans, an appropriate grind size, and controlled pouring.

Try a medium roast if you prefer a balanced combination of sweetness and acidity.

Adjusting the coffee-to-water ratio can also help you find your preferred strength.

How to Reduce Bitterness or Sourness

Bitterness may indicate excessive extraction, while sourness can sometimes suggest insufficient extraction.

If your coffee tastes bitter, try a slightly coarser grind or lower water temperature.

If it tastes sour or weak, try a slightly finer grind or a higher water temperature.

Make one adjustment at a time so you can understand what improves the result.

How to Clean and Maintain Your Chemex Coffee Maker

Regular cleaning helps keep your Chemex in good condition and prevents old coffee oils from affecting the flavor of future brews.

How to Clean a Chemex After Every Use

After brewing:

  1. Remove the used paper filter and coffee grounds.
  2. Rinse the inside of the Chemex with warm water.
  3. Wash away any remaining coffee residue.
  4. Allow the brewer to dry completely before storage.

Avoid using abrasive cleaning tools that could scratch or damage the glass.

Deep Cleaning Your Chemex

Over time, coffee oils may build up inside the glass.

Use a suitable coffee equipment cleaning product according to its instructions. Rinse thoroughly afterward.

If your Chemex has a wooden collar and leather tie, remove them before washing when possible. Keep these parts dry to prevent damage.

How to Store Your Chemex

Store your Chemex in a safe, dry place where it will not be knocked over.

Avoid placing heavy objects on it or exposing it to sudden temperature changes. Although the glass is designed for brewing, it can still break if dropped or handled roughly.

Frequently Asked Questions About Using a Chemex

How Much Coffee Should I Use for One Cup of Chemex?

For a single serving, start with approximately 15–20 grams of coffee and 240–320ml of water. A 1:16 ratio is a useful starting point. Adjust the measurements based on your preferred strength.

What Is the Best Grind Size for Chemex Coffee?

Medium-coarse is a good starting grind size for Chemex. The grounds should resemble coarse table salt. Adjust slightly depending on how quickly the water drains and how the coffee tastes.

Do I Need Special Filters for a Chemex?

Chemex-specific paper filters are recommended because they are designed for the brewer’s shape and filtration requirements. Choose the correct filter style for your Chemex model.

Why Does Chemex Coffee Taste Bitter?

Bitter coffee may result from excessive extraction, a grind that is too fine, or water that is too hot. Try adjusting one of these factors at a time.

Can I Use Regular Paper Coffee Filters in a Chemex?

Standard coffee filters may not fit properly or provide the same filtration as Chemex filters. For the most consistent results, use compatible Chemex paper filters.

How Long Does It Take to Brew Coffee with a Chemex?

Many small-to-medium Chemex recipes take approximately 3.5–5 minutes. Brewing time depends on grind size, batch size, filter, and pouring technique.

Is Chemex Better Than a French Press?

Neither method is universally better. Chemex produces a cleaner, lighter-bodied cup because of its thick paper filter. A French press generally produces a fuller-bodied coffee with more oils and sediment. Your choice depends on your taste preference.

Final Thoughts: Is the Chemex Coffee Maker Worth Using?

The Chemex coffee maker is a great option if you enjoy clean, smooth, and carefully prepared coffee. Its simple design makes it suitable for beginners, while its manual brewing process gives experienced coffee drinkers plenty of room to experiment.

Start with a 1:16 coffee-to-water ratio, medium-coarse grounds, and water around 90–96°C. Once you understand the basic process, experiment with different coffee beans, pouring techniques, and measurements.

With a little practice, you can prepare a consistent cup of Chemex coffee and enjoy the unique flavors of your favorite beans at home.

James Hoffmann

Leave a Comment